emacs-orgmode@gnu.org archives
 help / color / mirror / code / Atom feed
From: Matt Huszagh <huszaghmatt@gmail.com>
To: Timothy <tecosaur@gmail.com>
Cc: , Max Nikulin <manikulin@gmail.com>, emacs-orgmode@gnu.org
Subject: Re: [PATCH] Fix regex for determining image width from attribute
Date: Thu, 02 Dec 2021 18:06:16 -0800	[thread overview]
Message-ID: <871r2ucuhz.fsf@gmail.com> (raw)
In-Reply-To: <87zgpkq5a5.fsf@gmail.com>

Timothy <tecosaur@gmail.com> writes:

> Thanks for your thoughtful deliberation on this.

No worries, and thanks for continuing to engage with it.

>> The other consideration is if we take the first point as a given (that
>> org should use width directives for other backends), should it also
>> attempt to interpret directives that are ambiguous? In this case, do we
>> interpret 1.2 as 1.2? If  could only be ,
>> I’d be inclined to agree that this is logical. I also understand the
>> case for , though this is slightly less clear. But, what if
>> someone used 1.2? Seems a bit unusual I know, but maybe
>> someone would want this. Again, I don’t think we should guess if there’s
>> a chance we could be wrong.
>
> I feel this very much depends on how bad “guessing wrong” is, and as previously
> discussed, since it’s rather easy to correct or set `org-image-actual-width' to
> prevent this, I’m not sure it warrants being terribly concerned about.

I think the problem here is that `org-image-actual-width` is essentially
a global solution to a potentially local problem. I can't set
`org-image-actual-width` to nil for just one image.

> Thanks for continuing with this. Moving forward, I think it would be best to:
> ⁃ Make a patch just for prioritising `#+attr_org'
> ⁃ Make a patch just improving the regex (before or after the `#+attr_org' patch)
> ⁃ Discuss changing the behaviour of image previews separately later / in another
>   thread, linking to this thread when doing so.
>
> How does that sound?

Yep, sounds good.

> Lastly, a comment on your documentation patch from earlier. I like the changes
> to `org-image-actual-width', however I think you’ve been over-eager with scrapping
> the current docstring for `org-display-inline-image--width'. Since the behaviour
> is implemented there, I think it should at a minimum be documented there.
> The docstring for a function referring to a variable’s documentation for how it’s
> handled by the function seems a bit weird.

I was torn on this as well. However, I ended up feeling that it would be
worse to duplicate the same information in two places. This requires
updating the information in two places instead of one, and, worse, the
documentation could easily diverge. Because the function isn't
public-facing, but the variable very much is, I felt it better just to
include the documentation for the variable.

I also don't think removing the documentation from the function is that
bad. A lot of what that function does is to follow what the variable
tells it to do. Again, the function won't be called directly by an
end-user, so requiring that the developer refer to other documentation
for understanding implementation details seems reasonable. Finally,
there are numerous functions in org that tell you to refer to
documentation elsewhere (especially defcustoms) for further information.

Anyway, I still feel that the earlier patch (before regex changes is the
right one). But, if you want me to revert the documentation removal from
the function I will.

Matt


  reply	other threads:[~2021-12-03  2:07 UTC|newest]

Thread overview: 32+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-11-21 19:08 [PATCH] Fix regex for determining image width from attribute Matt Huszagh
2021-11-21 19:20 ` Timothy
2021-11-21 19:51   ` Matt Huszagh
2021-11-22  8:29     ` Timothy
2021-11-22 16:11       ` Matt Huszagh
2021-11-22 17:54         ` Timothy
2021-11-22 20:53           ` Matt Huszagh
2021-11-23  4:59             ` Kyle Meyer
2021-11-23  5:14             ` Timothy
2021-11-23  5:38               ` Matt Huszagh
2021-11-23  5:39                 ` Timothy
2021-11-23  7:46                   ` Matt Huszagh
2021-11-23 16:44                     ` Max Nikulin
2021-11-24  1:57                       ` Matt Huszagh
2021-11-24 14:48                         ` Max Nikulin
2021-11-24 15:59                           ` Matt Huszagh
2021-11-24 17:00                             ` Max Nikulin
2021-11-25 16:43                               ` Max Nikulin
2021-11-29  0:23                                 ` Matt Huszagh
2021-11-29  5:13                                   ` Timothy
2021-12-01  3:24                                     ` Matt Huszagh
2021-12-01  4:54                                       ` Timothy
2021-12-03  2:06                                         ` Matt Huszagh [this message]
2024-05-02 16:28                                           ` Ihor Radchenko
2024-05-07  4:59                                             ` Karthik Chikmagalur
2024-05-08 10:36                                             ` Max Nikulin
2024-05-08 10:54                                               ` Ihor Radchenko
2024-05-09 10:47                                                 ` Max Nikulin
2024-05-13 12:42                                                   ` Ihor Radchenko
2024-05-13 12:42                                               ` Ihor Radchenko
2021-11-29 12:15                                   ` Max Nikulin
2021-11-22 14:30     ` Max Nikulin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

  List information: https://www.orgmode.org/

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=871r2ucuhz.fsf@gmail.com \
    --to=huszaghmatt@gmail.com \
    --cc=emacs-orgmode@gnu.org \
    --cc=manikulin@gmail.com \
    --cc=tecosaur@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
Code repositories for project(s) associated with this public inbox

	https://git.savannah.gnu.org/cgit/emacs/org-mode.git

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).